Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
NiceRF | STP100M | Pulse output | Non-wrist | 3D Pedometer Module
STP100M is a 3D pedometer functional chipset which includes a G-sensor and MCU. It has adopted the pulse-type interface, with the 3D MEMS sensor (G sensor) and high precision of 3Dpedometer algorithm, it can give a precise pedometer in any direction. This module has the characteristics of small size, low power and etc. The simple digital interface ensures it can be easily embedded in various kinds of pedometer functional system.
★Note: The algorithm of our pedometer is adjustable according to customer’s requirement. We can provide the pedometer for shoes, table class pedometer and bracelet pedometer wearing on wrist, pedometer wearing on waist and pedometer putting inside the pocket. Pls indicate clearly when purchasing
Features and application;
Features:
-
High precision 3D pedometer algorithm
-
Ultra-small size
-
Low sleep current
-
Pulse output interface
Application:
-
3D pedometer
-
MP3 pedometer
-
Outdoor handheld
-
Healthcare products
-
Pedometer shoes
Specification:
Electrical characteristics:
Functional description:
Working mode:
1) Normal work mode The chipset goes into normal working mode when step motion is detected. The Step-out pin is in low level usually, it will output one high pulse with one step motion, and the high level of the pulse is around 50ms.
Sleep mode:
If the module doesn’t automatically come to sleep status within 20 seconds, the G sensor doesn’t work. the entire pedometer chipset in low power consumption mode, then the current is less than 4uA!
Pin and dimension:
Pin definition:
Mechanical dimension:
Subtitle | N/A |
---|---|
UPC/EAN | 4604046161518 |
Count | N/A |
M.R.P | ₹742.00 |
Brand Name | G-NiceRF |
Model | STP100M |
Whoesale | Available |
Working voltage range | 2.3-3.6 V |
Storage Temperature | -10 ~ +50 °C |
Operating Temperature | -10 ~ +50 °C |
Sleep current | <4 μA |
Dimension | N/A |
Working current | <25 μA @ 3V |
Pedometer Error | N/A |
Pedometer Resolution | 1 step |