4S Lithium Battery Charger 14.8V-16.8V 30A for Li ion Ebike Bicycle Scooter

₹10,000.00

In stock

SKU

BC024

Feature:

Protection function: Over voltage / Over temperature / Over current / Short circuit and Polarity
The indicator of LED: Red is charging, green is charge finished or prepare to charge
Light, Small, Stable, High efficiency, Safe, etc. Precise limit of voltage & current qualified fully charged and avoid overcharge
Using aluminum heat sink, Good thermal design, can better cool the power device, Consistent with the principle of hot air flow, extend the service life
The main power transformer adopts EC40 core, PC40 material, High efficiency, low iron loss, Enough power capacity, Have sufficient power margin.
.Input and output filter electrolytic capacitor use withstand temperatures -40 to +105°C, with Low Impedance, High reliability, Long useful life, High ripple capability, etc features

Input Voltage	100-240Vac 47-63Hz	Case Material	Aluminum
Charge Voltage and Current	16.8V 30A	Charge Method	CC/CV
Size	205X121X100mm	Weight	<2KG
Operating Temperature	-20°C ~ +50°C	Storage Temperature	-40°C~ +80°C
The indicator of LED: "RED" Means Charging "Green" Means Full of Electricity

Built-in a small fan, make heat dissipation much better
It contains filters inside so that the charger makes anti-jamming performance much strengthen.
There is a potentiometer,it can adjust the voltage within a certain range.
Brand Name: YZPOWER
Model Number: YZ84002000
Use: Standard Battery
Type: Electric
Input: AC 100-240V
Output: DC 16.8V 30A
Size: 20*12*10CM
Weight & Box: 2.0KGs
Material: Aluminum

Should be checked before using the battery charger is consistent with the type of charger model is correct. If the model is not matched, charging may be abnormal and the battery may be seriously damaged.
Make sure the battery is properly connected battery, do not connect the reverse polarity
Then the AC plug in the AC outlet, then the charger starts to charge the battery, charging status LED color light displayed by the top of the charger. (The indicator of LED: red is charging, green is charge finished or prepare to charge)If the green light is always on, check that the charging cable is firmly connected to the battery.
Once the battery is fully charged, unplug the chargers power plug first, then unplug the battery