RV09 EC12 10K Rotary Encoder - Digital Potentiometer Coding Volume Control - 5 Pin Plum handle 12MM (Horizontal mount)

• A rotary encoder with 20 steps per revolution. Rotary encoders are widely used in volume controls.

• This rotary encoder can rotate and does not have, like almost all potentiometers, a start, and end position.

• However, rotary encoders must be read digitally. Based on this, you can determine the direction in which the rotary encoder moves and how many steps have been taken.

• This rotary encoder also has a push-button built-in for example to select something. (between pin D and E)

• The rotary encoder can be read out by means of pin A, B, and C.

• A standard potentiometer knob can be attached to the rotary encoder.

• See the images for the sizes and the explanation of the pins.

Specification:

• Total Impedance: 10kohm
• Allowable error value of total impedance soil: +/- 20%
• Impedance Characteristics: B Taper
• Voltage Rating: 50V AC; 12V DC
• Freeze power: <0.05W (or equal)
• Noise: 100mv (max)
• Insulation Resistance Group Value: 100mohm Min DC 250V
• Withstand Voltage Characteristics: AC 300V for 1min
• Residual resistance value: 20ohm (max)
• Synchronization error value: -/dbof/db+-/db
• Full rotation angle: 170 degree (5 deg tolerence)
• Rotational torque: 20~100 gf.com
• Rotation Stop Strength: 3kgf.co max
• Shaft push-pull strength: 4kgf.co max
• Solder heat resistance: 250 degree or less within 2 sec
• Life: 10,000 rotations

• Mounting Type: Horizontal