Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
G-NiceRF| SK108H|1W bi-directional| hopping functions|4 channels remote control Module
SK108H is an industrial four channels wireless switch controller with hopping function, it provides a maximum of four-channel signal input and maximum four channel control output. It features a simple interface and reliable performance. The parameters can be modified by PC software / UART command / remote controller (SK108-S). A DIP switch on the module can be used to change operating frequency (maximum 16 groups), operation mode, etc. Using this module, the user can replace a wired device with the wireless connection, which significantly reduces the cost and save much time.
Features and application:
Features:
-
Frequency hopping algorithm
-
Up to 3Km line-of-sight in open area
-
16 predefined channels
-
Parameters configurable by PC software/ Remote
-
controller/ UART Command
-
Real-time/Timing working mode for optional
-
GFSK modulation
-
Bi-directional wireless switch control
-
anti-interference
-
Sensitivity up to -121 dBm
-
Maximum output power: 1 W
-
Indicate and alarm when battery low
-
Working voltage 9 ~ 18 V
-
Working temperature range: - 40 ~ + 85 ° C
-
Weight: 143g
Applications:
-
Remote control switch control
-
Security system
-
Home automation remote sensing
-
Wireless remote telemetry
-
Building automation and security
-
Access control system
Specification:
Electrical characteristics:
Functional description:
Interface:
The description of interfaces as below
Application Connection:
The input port is pulled up internally, leave open or connect with 3.3V will result in a high level, it is low level when connecting to GND.
A high level will make the output of the other side short out. And low level will make the output of the other side open. Below is a regular connection:
DIP Definition:
Dip switch Settings (valid when power on again )
DIP8—Normal working mode selection
ON—Real-time mode ( In this mode, when state changes in input port, it transmit signal immediately)
OFF—Timing mode (Signal transmitted at the predefined time interval according to the setting of DIP6)
DIP7—master/slave selection
ON—the master
OFF—the slave
DIP6—Time interval selection of timing mode
ON—Slow time (configurable, default 30S)
OFF—Fast time (configurable, default 2S)
DIP5—Mode selection
ON—Normal working mode
OFF—Configuration mode (Wireless setting on PC via configuration module K108-S)
DIP4~1 —Working frequency channel selection, a total of 16 channels(default channel interval: 0.5M), frequency is
configurable through PC software / UART Command/ Remote controller SK108.
Relationship between DIP switch and working frequency channel:
Pin and dimension:
Pin definition:
Mechanical dimension:
Subtitle | N/A |
---|---|
UPC/EAN | 4604046161396 |
Count | N/A |
M.R.P | ₹6,780.00 |
Brand Name | G-NiceRF |
Model | N/A |
Whoesale | Available |
Dimension | 18X9X11 cm |
Working voltage range | 9~30 V |
Supply Voltage | N/A |
Receiving current | <20 mA |
Receiving sensitivity | -121 dBm |
Operating Temperature Range | N/A |
Operating Temperature | N/A |
Maximum output power | 1 W |
Standby current | <7 mA |
Distance (Range) in KM | 3Km in open area |
Data Rate | N/A |