Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
LORA UART RF Module-433MHz 470MHz-5W-Lora6500AES-5W AES Encrypted LORA High Power Wireless Transceiver Data Transmission Module
LoRa6500AES is an industrial-class wireless transceiver data transmission module with aluminum housing, based on SX1276/1278 chips from Semtech. This module adopts LoRa technology for high sensitivity and adds PA to achieve long-range distance. For better security, the module uses AES128 encryption. LoRa6500AES has 5W output power and TTL/RS232
₹14,018.00
In stock
SKU
Lora6500AES
Features and application:
Feature:
-
Transmission distance in open area up to 15Km @ 91bps
-
433/470MHz
-
40 channels
-
Lora modulation
-
Interface: TTL/RS232/RS485
-
Sensitivity: -139 dBm
-
Max output power: 5W (+37dBm)
-
Working voltage: 9 ~ 30 V
-
Working temperature: -40 ~ +85 °C
Application:
-
Remote control telemetry
-
Remote meter reading
-
Security system
-
Industrial data acquisition
-
Home automation
-
Wireless data communication
-
Access system
-
Robot control
Specification:
Electrical characteristics:
|
Parameters |
Min. |
Typ. |
Max. |
Unit |
Condition |
|
Working condition |
|||||
|
Voltage range |
9 |
12 |
30 |
V |
|
|
Operating Temperature |
-40 |
25 |
+85 |
℃ |
|
|
Current consumption |
|||||
|
Rx current |
<18 |
mA |
TTL level |
||
|
Tx current |
<2 |
A |
@30dBm |
||
|
Sleep current |
<4 |
uA |
|||
|
RF parameters |
|||||
|
Frequency range |
414.92 |
433.92 |
453.92 |
MHz |
@433MHz |
|
470.92 |
490.92 |
509.92 |
MHz |
@490MHz |
|
|
Data rate |
91 |
656 |
17353 |
bps |
LoRaTM |
|
Output power range |
24 |
/ |
+37 |
dBm |
@433MHz @490MHz |
|
Sensitivity |
-139 |
dBm |
91bps |
||
Functional Description:
Block Diagram:
Operation
1) Power on Reset
Standard supply voltage of 12V, After power-on reset, the TX LED (Red) and RX LED (Blue) will blink 3 times,（If no lights, the module may damaged）, The total reset time is around 2s, as below:
2) Working Mode
The CS and SET Pin is internally pulled up. Pull CS pin high or leave it open will make Lora6500AES enter into working mode.
In working mode, Lora6500AES stay in receiving mode and wait for the series signal and RF signal. Lora6500AES can connect with any device which is a standard TTL interface.
-
When the series signal comes, Lora6500AES will check the input series signal if there is any error, and then transmit the received data out via RF automatically if no errors found.
-
When RF signal comes, Lora6500AES will check the input RF signals if there is any error, and then transmit the received data out via series port automatically if no errors found.
-
When one packet is transmitted successfully, the Red LED will blink once.
-
When one packet is received and verified with no problem, the Blue LED will blink once.
The easiest way to test the module is by using a computer(PC software)
Pin and dimension:
Pin definition:
Mechanical dimension:
| Subtitle | N/A |
|---|---|
| UPC/EAN | 4604046162201 |
| Count | 1 |
| M.R.P | ₹14,018.00 |
| Brand Name | CentIoT |
| Model | Lora6500AES |
| Whoesale | Available |
| Supply Voltage | N/A |
| Dimension | 13X8X9 cm |
| Working voltage range | 9 ~ 30 V |
| Data transfer rate | N/A |
| Receiving sensitivity | -139 dBm |
| Maximum output power | 5W 37dBm |
| Sleep current | <4 μA |
| Receiving current | <18 mA |
| Operating Temperature Range | -40 ~ +85 °C |
| Data Rate | @LoRaTM 656 bps |
| Operating Temperature | N/A |
| Frequency | 433/470MHz |
Write Your Own Review
Featured
