SI4432-433MHz 470MHz- aluminum housing-SV6500-Mesh 5W mesh network RF module

SI4432-433MHz 470MHz- aluminum housing-SV6500-Mesh 5W mesh network RF module

STP200M - IIC Interface - Embedded - 3D Pedometer Module

STP200M - IIC Interface - Embedded - 3D Pedometer Module

SV652 - 500mW - Industrial - anti-interference - RF wireless data transmission module - with - aluminum housing

SV652 is an Industrial class & highly-integrated RF transceiver module, which adopts the high-performance Si4432 from Silicon Labs and industrial micro-controller. TTL / 232 /485 can be chosen corresponding to SV652-TTL / SV652-232 / SV652-485. SV652 has good sensitivity and 500mWoutput power to achieve a long RF range and reliable RF communication. To avoid interference, SV652 provides 40 frequency channels and configurable Net ID. SV652 is flexible but easy to use, it comes with many parameters, such as frequency, data rate, output power, Net ID, Node ID. Users can configure the parameters through a PC or customer’s own device.

₹2,092.00
In stock
SKU
SV652

Features and application:

Feature:

  • 433/470/868/915 MHz (Customizable240-930 MHZ)

  • Industrial class

  • 40 channels

  • 4 bytes Net ID & 2 bytes Node ID

  • Series Data Rate: 1200 ~ 115200 bps

  • Air Data Rate: 1200 ~ 115200 bps

  • GFSK modulation

  • RSSI

  • Interface: RS232-DB9

  • Antenna matching automatically

  • Bi-directional & Half duplex

  • Sensitivity: -121 dBm

  • Max output power: 500 mW (+27 dBm)

  • Working voltage: 3.3~ 6.5V

  • Working temperature: -40 ~ +85 °C

  • Weight: 47g

  • Parameters save automatically

Application:

  • Remote control telemetry

  • Security system

  • Industrial data acquisition

  • Home automation

  • Wireless data communication

  • Access system

  • Robot control

  • Wireless PC peripherals

Specification:

Functional description:

Typical application:

Operation

1) Power on Reset

After powered on reset, the TX LED (Red) and RX LED (Blue) will blink 3 times, The total reset

time is around 2s, as below:

Note:Contact us to customize if you want to shorten the POR time.

2) Sleep mode

After Power-on Reset, the module enters into sleep mode when the CS pin is pulled low. In this mode,

the current consumption is very small. In Sleep mode, the module can’t do any communication and

cant’ be set even Set Pin is pulled low. All the parameters will be kept unchanged in Sleep mode.

User can wake up the module by pulling high the CS Pin.

3) Working Mode

The CS and SET Pin is internally pulled up. Pull CS pin high or leave it open will make SV654 enter

into working mode.

Pin and dimension:

Mechanical dimension:

FAQ:

Why module cannot communicate properly?

a) Check if the band, channel, rate, NET ID has set to the same;

b) Check if there is a power connection error;

c) Check if the module is enabled (CS high);

d) Check if the antenna connection is not correct;

e) Check if the module is damaged.

Why transmission distance is not as far as it should be?

a) Power supply ripple is too large;

b) The antenna types do not match, or not properly installed;

c) The surrounding environment is harsh, strong interference sources;

d) Surrounding co-channel interference; 

Why receiving data incorrect?

a) Improper parameter settings;

b) The module data interface is bad.

More Information
Subtitle N/A
UPC/EAN 4604046162515
Count N/A
M.R.P ₹4,184.00
Brand Name CentIoT
Model SV652
Whoesale Available
Supply Voltage N/A
Dimension 13X8X9 cm
Working voltage range 3.3-6.5 V
Data transfer rate N/A
Receiving sensitivity up to -121 dBm
Maximum output power 500 mw
Sleep current <5 μA
Receiving current N/A
Operating Temperature Range -40 ~ +85 °C
Data Rate 1.2-115.2 kbps
Operating Temperature N/A
Frequency 433/470/868/915mhz
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts