G-NiceRF LoRa serial RF module - LORAWAN node RF module - LN610 100mW Wireless Data transmission RF module

G-NiceRF LoRa serial RF module - LORAWAN node RF module - LN610 100mW Wireless Data transmission RF module

LORAWAN Gateway- LoRa RF module LG1301_PF WIFI - GPS interface LORA Gateway transmitter and receiver RF module

LORAWAN Gateway- LoRa RF module LG1301_PF WIFI - GPS interface LORA Gateway transmitter and receiver RF module

LORAWAN Gateway RF module LORAWAN SX1301 LG1301_SE UART interface

GW1301-SE is the LoRaWAN gateway. It works with LoRaWAN node LN610 only. It integrates Standard LoRaWAN protocol V1.0 Class C. When GW1301-SE received data from LN610, GW1301-SE will output the RF data and Device Addr of LN610 to the serial interface. When serial data with Device Addr of target LN610 inputted to GW1301-SE, it will send the serial data to target LN610. All wireless communication comply with the LoRaWAN protocol. It is easy to build a LoRaWAN network without knowing how LoRaWAN works.

₹23,099.00
In stock
SKU
GW1301-SE

Feature and application:

Feature:

  • LoRaWAN protocol supported

  • Uart interface

  • AES128 encryption

  • 8 channel communication simultaneously

  • Configurable parameters

  • OTAA & ABP

  • Long range

  • ADR

  • EU433M / EU868M / KR920M / AS923M / CN780M/ CN470M / US915M / AS915M

Application:

  • Smart city

  • Smart Metering ( Water, Electric, Gas meter )

  • agricultural Monitoring

  • Irrigation control

  • Internet of Things (IoT)

  • M2M

  • Wireless Sensors

  • Wireless Alarm and Security Systems

Specification:

Electrical Characteristics:

Block diagram:

Function Description:

1) Power on 

After powered on, the power led will light on to indicate, the gateway starts the initialization. After 15s, the Tx LED will blink once to indicate the Linux system is ready, and then 5s later, the status LED will blink once per second which indicate the whole system is ready. Then it enters the normal working mode.

2) Normal Working Mode

In normal working mode, when the payload is inputted to LN610, LN610 will transmit the packet to GW1301-SE automatically. After GW1301-SE received the data, it will output the payload in uplink format by the serial interface.

when payloads with downlink format are inputted to GW1301-SE. GW1301-SE will transmit the packet automatically. LN610 will compare its Device Addr with the received packet. If the Device Addr is matched, it will output the payload by the serial interface. 

Pin and dimension:

Pin definition:

Mechanical Dimension:

More Information
Subtitle N/A
UPC/EAN 4604046162072
Count N/A
M.R.P ₹28,099.00
Brand Name CentIoT
Model GW1301-SE
Whoesale Available
Supply Voltage N/A
Dimension N/A
Working voltage range 12V
Data transfer rate N/A
Receiving sensitivity -133 dBm
Maximum output power 24 dBm
Sleep current N/A
Receiving current <280 mA
Operating Temperature Range N/A
Data Rate N/A
Operating Temperature -40 to 85 deg cels
Frequency 433/470/868/915MHz
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts