LORA1281 sx1281 lora module - 100mW 2.4Ghz long range wireless transceiver module RF module

LORA1281 sx1281 lora module - 100mW 2.4Ghz long range wireless transceiver module RF module

RF4463PRO 100mW Wireless Transceiver Module si4463 module 433 470 868 915 100mW rf module

RF4463PRO 100mW Wireless Transceiver Module si4463 module 433 470 868 915 100mW rf module

G-NiceRF LoRa serial RF module - LORAWAN node RF module - LN610 100mW Wireless Data transmission RF module

LN610 is the LoRaWAN node module. LG1301-PF/ LG1301-SE are LoRaWAN gateways. LN610 works with LG1301 to build a LoRaWAN system. This LoRaWAN system integrated the protocol of LoRAWAN V1.0 and support class C. When data input to LN610, LN610 will transmit to LG1301. When received the data from LG1301, LN610 will output the received data to the series interface. All wireless communication complies with the LoRaWAN protocol. Either LG1301-PF or LG1301-SE can be worked with LN610. The detail of these two gateways refer to the datasheet of the gateway

₹2,004.00
In stock
SKU
LN610

Feature and Application:

Feature:

• LoRaWAN protocol Class C supported

• Uart interface

• Long range

• AES128 encryption

• 8 channel communication simultaneously

• Configurable parameters

• OTAA & ABP

• Long range & Small size

• ADR

 EU433M / EU868M / KR920M / AS923M / CN780M/ CN470M / US915M / AS915M

Application:

• Smart city

• Smart Metering ( Water, Electric, Gas meter )

• Agricultural Monitoring

• Irrigation control

• Internet of Things (IoT)

• M2M

• Wireless Sensors

• Wireless Alarm and Security Systems

Specification:

★ Note: the following parameters are VCC = 3.3, with 50-ohm copper axis test instrumentation

LN610  module

Function Description:

1) Power on Reset

After powered up, both the Red and Blue led will blink 1 time than off.LN610  module

1) Sleep mode

In this mode, LN610 works with minimal current consumption. It will not respond to the inputted wireless and UART data. Pull high CS pin, LN610 will leave this mode.

2) Normal Working Mode

In this mode, LN610 can communicate with GW1301. The TX LED(Red) will blink once when one packet is transmitted out. And RXLED(Blue) will blink once when one packet is received and verified no problem.

3) Setting mode

In normal working mode, pull low the SET pin to make LN610 enter into setting mode. Both of the TXLED and RXLED will turn on to indicate.

In setting mode,the parameters of uart will fix to:

baud_rate = 9600, data_bit = 8, parity_bit = None, stop_bit = 1;

Pin and Dimension:

Pin definition:

LN610  module pin

Mechanical dimension:

LN610  module



More Information
Subtitle N/A
UPC/EAN 4604046162041
Count N/A
M.R.P ₹2,008.00
Brand Name CentIoT
Model N/A
Whoesale Available
Supply Voltage N/A
Dimension N/A
Working voltage range 3.3V
Data transfer rate N/A
Receiving sensitivity -132dBm
Maximum output power N/A
Sleep current <2 μA
Receiving current 18 mA
Operating Temperature Range -40 to 85 deg cels
Data Rate N/A
Operating Temperature N/A
Frequency N/A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts