Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
G-NiceRF Demo board for LORA1278F30 and LORA1276F30 LoRa RF Module
Users can use the Demo board to set the parameters of the RF module such as working mode /frequency /transmitter power/transmission data rate through the buttons, and measure the wireless communication distance.
Features and application:
Working Mode:
1) Master Mode: Send 1 packet per second, and waiting for the acknowledge;
2) Slave Mode: Stay in Rx mode to wait for the data from the master, it will send back;
3) The acknowledged signal after received the data from the master.
4) Tx Test Mode: RF module continuously transmit signal;
5) Rx Test Mode: RF module is always in Rx mode;
6) Standby Mode: RF module is always in a standby state;
Button Operation:
1) [SET] Button
Press the [SET] button to enter setting mode if not in setting mode. In setting mode,
press[SET]button to toggle between the set parameters: working mode /frequency/ output power / data rate / spreading factor/ Bandwidth. The related LCD ICON will flash to indicate.
2) [UP] Button
In setting mode, press the [UP] button to increase the value of the flash icon.
Note: The DEMO board has FLASH memory inside, all the setting parameters will behave automatically and keep unchanged even power-off.
Specification:
The LCD Full Segment is as below:
Users can set the frequency, power, transceiver speed and other parameters through
the keys
Subtitle | N/A |
---|---|
UPC/EAN | 4604046161563 |
M.R.P | N/A |
Count | N/A |
Brand Name | CentIoT |
Model | N/A |
Whoesale | Available |
Supply Voltage | N/A |
Output Voltage | N/A |
Color | N/A |
Dimension | N/A |