Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
LoRa6102Pro - 1W - AES Encrypted - LoRa MESH- Wireless Data Transmission Module
The Lora Pro module is a new series of upgraded networking wireless communication modules from Wireless. It is based on Semtech's SX127X chip and uses advanced LoRaTM spread spectrum modulation frequency hopping technology to achieve high sensitivity. The penetrating power and communication distance are far superior to the current FSK and GFSK products and have stronger anti-interference. In order to meet the application needs of different customers, we design the module software of this series as an all-in-one way. Users can switch between different working modes through the PC software configuration module. In MESH mode, the routing module has automatic routing. Function, the user can form a network transmission without a blind zone without distance limitation by means of multi-module combination. At the same time, users can also encrypt AES128 wireless data through PC software or serial port instructions, making data transmission more secure. The Lora6102Pro module is designed for 1W output power and is available in TTL/RS232/RS485 levels. It is widely used in wireless remote transmission control. Note: The Lora Pro series can be configured to be compatible with our previous Lora data transmission modules.
Features and application:
Feature:
-
Transmission distance in open area up to 8000 meters @ 91bps
-
433/490/868/915 MHz(Customizable)
-
AES128 Data encryption
-
MESH & Node working mode
-
40 channels
-
Lora modulation
-
Interface: TTL/RS232/RS485
-
Sensitivity: -139 dBm
-
Max output power: 500mW/1W(+30/+27dBm)
-
Working voltage: 3.3 ~ 6.5 V
-
Working temperature: -40 ~ +85 °C
Application:
-
Remote control telemetry
-
Remote meter reading
-
Security system
-
Industrial data acquisition
-
Home automation
-
Wireless data communication
-
Access system
-
Robot control
Specification:
Note: High-quality 3.3V LDO is integrated, and Pin CS / SET are the 3.3V interfaces. TXD/RDX is also 3.3V for TTL modules.
Functional description:
Typical Application:
Pin and dimension:
Pin Definition:
Mechanical dimesnion:
FAQ:
Why module cannot communicate properly?
a) Check if the band, channel, rate, NET ID has set to the same;
b) Check if there is a power connection error;
c) Check if the module is enabled (CS high);
d) Check if the antenna connection is not correct;
e) Check if the module is damaged.
Why transmission distance is not as far as it should be?
a) Power supply ripple is too large;
b) The antenna types do not match, or not properly installed;
c) The surrounding environment is harsh, strong interference sources;
d) Surrounding co-channel interference;
Why receiving data incorrect?
a) Improper parameter settings;
b) The module data interface is bad.
Subtitle | N/A |
---|---|
UPC/EAN | 4604046162126 |
Count | N/A |
M.R.P | ₹9,778.00 |
Brand Name | CentIoT |
Model | LoRa6102Pro |
Whoesale | Available |
Supply Voltage | N/A |
Dimension | 13X8X9 cm |
Working voltage range | 3.3 ~ 6.5 V |
Data transfer rate | N/A |
Receiving sensitivity | -139 dBm |
Maximum output power | 500mW/1W(+30/+27dBm) |
Sleep current | <250μA |
Receiving current | <16mA |
Operating Temperature Range | -40 ~ +85 °C |
Data Rate | @LoRaTM 656 bps |
Operating Temperature | N/A |
Frequency | @433/490/868/915 MHz |