HC-06 6 Pin Bluetooth Module

This Bluetooth module can easily achieve serial wireless data transmission. Its operating frequency is among the most popular 2.4GHz ISM frequency band (i.e. Industrial, scientific and medical). It adopts Bluetooth 2.0+EDR standard. In Bluetooth 2.0, the signal transmit time of different devices stands at a 0.5 seconds interval so that the workload of Bluetooth chip can be reduced substantially and more sleeping time can be saved for Bluetooth. This module is set with serial interface, which is easy to use and simplifies the overall design/development cycle.
Specification

• Bluetooth protocol: Bluetooth 2.0+ EDR standard

• USB protocol: USB v1.1/2.0

• Operating frequency: 2.4GHz ISM frequency band

• Modulation mode: Gauss Frequency Shift Keying

• Transmit power: ≤ 4dBm, the second stage

• Sensitivity: ≤-84dBm at 0.1% Bit Error Rate

• Transmission speed: 2.1Mbps(Max)/160 kbps(Asynchronous)； 1Mbps/1Mbps(Synchronous)

• Safety feature: Authentication and encryption

• Supported configuration: Bluetooth serial port (major and minor)

• Supply Voltage: +3.3 VDC 50mA

• Operating temperature: -20 to 55℃

• Size: 36.5*16mm

Specification:

• HC-06 Bluetooth Module - Slave Module | We advise to install "Bluetooth master module" and use this device as a slave

• Input power supply between 3.3~6V, not to exceed 7V

• The devices do not have power supply reversing func, so please connect the power supply with care

• The "State" is output foot for LED status when Bluetooth "Unconnected", output "Pulse"; when Bluetooth "connected", output "High level", we can determine the states from "MCU"

• Range: HC-06 module can reach a range of up to 9 meters (30 ft)

Note: