Thermal Pads Conductive Heatsink Plaster Viscous Adhesive

• It has good conductivity and a wide service temperature range(-60~200), short term 300 high temperature.

• The surfaces curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent-free.

• It can be applied safely in elastic adhesion, heat dissipation, insulation, and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.

• It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

Specification:

Operation Manual:

• When it is used, the adhesive is directly extruded, rubbed and glued to the surface, and then covered immediately after application, keep the tube closed to prevent getting dried up.

• The curing speed depends on relative humidity and temperature; the higher the temperature, the faster the curing rate is, the slower the vice versa.

• Recommended coating thickness: 0.1-0.5mm, the thinner the better.

• Before use, please clean the surface with solvent (such as alcohol) or detergents and ensure the surface is clean before application.