Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
DC-DC 1500W 30A CC CV Boost Converter Step-up Module - Constant Current Constant Voltage Power Supply Module - 10V-60V to 12V-90V regulator
Description:
This is a non-isolated DC power converter module. High power and stable output, it converts 10-60VDC to 12-90V DC. High-quality components ensure high conversion efficiency, up to 97%. Designed with a smart temperature control fan, which will automatically work when the temperature reaches about 60℃, and stop when the temperature drops below 60℃. Widely used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power supply, DIY adjustable CV CC power supply, solar power charging, and various batteries charging.
₹2,196.00
In stock
SKU
DC046-1500W-30A-CC-CV-BOOST
Component Specification:
-
With the airfoil, the heat dissipation is very good, the output power is greater (48V input plus fan power can be around 1800W when the fan is added).
-
The temperature control fan, combined with the hydraulic bearing fan, is well balanced on the noise and heat dissipation. When the load is light, the fan does not rotate, and the load temperature reaches about 60 degrees, and the fan automatically turns. It can effectively reduce noise and prolong life.
-
The main power pipe insulation board uses high-grade alumina, and the thermal conductivity is 10 times as high as the ordinary insulation pad.
-
Using 100V 210A TO-247 large package power tube, the power allowance is large and the dynamic response is good.
-
The double large size iron silicon aluminum magnetic ring, 4 1.2 pure copper enameled wire and Rao, low heat, high efficiency.
-
New design, the conversion efficiency is up to 98.1%.
-
The brand 3296W multi-loop potentiometer has high adjustment precision and small drift.
-
Kang Tong wire output current sampling, constant current steady temperature drift small.
-
Undervoltage protection is adjustable, it can effectively protect all kinds of batteries, and can also be used in solar cells.
-
With the constant current function, it can be used to boost the battery car, charge the battery and so on.
-
3 20A fuse are connected in parallel, which can protect the risk of accidental short circuit of output.
-
Three indicator lights: under voltage, over current, power indicator, working state at a glance.
-
High-frequency capacitance is used in both input and output. The output ripple is low, heat is small, and the life is long.
-
The MLCC ceramic capacitor is added to the input and output, the output ripple is obviously reduced, and about 100 mV at the time of 48V to 72V 4A.
Features:
|
Parameter |
Value (1500W, 30A) |
|
Input voltage |
8 to 60V |
|
Input Current |
10V-30V input voltage, maximum current is 25A-30A; 31-60V input voltage, maximum current is 20A-25A |
|
Quiescent current |
15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current) |
|
Output voltage |
12 – 90V continuously adjustable |
|
Output Current |
22A MAX, 1. Over 15A replace existing heatsink with bigger heatsink and fan to enhance heat dissipation, 2. Related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be |
|
Constant Range (potentiometer) |
0.8-22A(+/-0.3A) |
|
Output Power: |
Input voltage * load current (less 5% loss due to efficiency) |
|
Working temperature |
-40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation) |
|
Operating frequency |
150KHz |
|
Conversion efficiency |
up to 93 to 897% |
|
Overcurrent protection |
Yes (with reduced flow adjustment, adjustable output current limit, currently exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current.) |
|
Short circuit protection |
Yes, 2 x 20A fuse are connected in parallel, which can protect the risk of accidental short circuit of output. |
|
Input reverse polarity protection |
Reverse Input Protection: Yes (150A power MOS reverse protection) |
|
Input Low Voltage Protection: |
Yes (10V-50V adjustable, self-recovery) |
|
Input Over Current Protection: |
Yes (automatically protect when input is more than 40A, and power supply voltage will not increase) |
|
Reverse Input Protection: |
Yes (150A power MOS tube, can be connected reversely for long time) |
|
Output Counter filling |
Yes, for charging blocking diode is not required. |
|
Installation |
four 3mm screws |
|
Connection |
solderless terminals output |
|
Module dimensions: |
130 x 84 x 52mm |
|
Weight |
372 g |
Component Diagram:
Performance Testing:
| Subtitle | N/A |
|---|---|
| UPC/EAN | 679043306372 |
| Count | 1 |
| M.R.P | ₹2,530.00 |
| Brand Name | CentIoT |
| Model | DC046-1500W-30A-CC-CV-BOOST |
| Whoesale | Available |
| Supply Voltage | 8 to 60V |
| Output Voltage | 12 – 90V continuously adjustable |
| Output Current | 22A MAX |
| Switching Frequency | 150KHz |
| Output ripple | N/A |
| Efficiency | 93 to 97% |
| Load Regulation | Yes |
| Voltage Regulation | Yes |
| Short Circuit Protection | Yes |
| Input Reverse Polarity Protection | Yes |
| Dimension | 130 x 84 x 52mm |
| Operating Temperature | -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation) |
Write Your Own Review
Featured
