DC-DC MT3608 Adjustable Boost Module 2A Boost Plate Step Up Module - Boost 2V-24V to 5V 9V 12V 28V 5V-28V (Open Connector)

DC-DC 1200W 20A CC CV Boost Converter Step-up Module - Constant Current Constant Voltage Power Supply Module - 10V-60V to 12V-80V regulator

LTC3780 DC 5-32V to 1V-30V 10A Automatic Step Up and Step - Down Regulator Charging Module

This device can monitor a DC-DC output voltage and quickly disconnect the power source from the DC-DC input load when an overvoltage condition occurs

₹1,796.00

In stock

SKU

DC011-LTC3780

Details

Specification:

Input voltage: DC5-32V;
Output voltage: DC1V-30V continuously adjustable; the default 12V shipment
Output current: 10A (MAX) ,long term within 8A
Output power: 80W, peak 130W, more than 80W please strengthen heat dissipation
Output ripple: 50mV (12V turn to 12V, 5A measured), Short circuit protection:YES Input reverse connection protection: No Output prevent reverse connection protection: No Operating temperature range: -45 ~ +85 Size: 77.6*46.5*15mm

Description:

The power supply is a high-efficiency Automatic voltage regulator. Whatever is the input voltage value, the output voltage can be maintained constant. For example, set the output to 12V, then the variation of the input voltage can be in the range of 5-32V, the output voltage will be maintained at 12V.
This module has a perfect protection function, and can be widely used in notebook power, vehicle power supply, solar charge, etc.. Advantages: The input uses replaceable fuse to protect power supply and equipment;
The whole electrolysis use patch, low resistance, high-frequency capacitor, to make the ripple down to the freezing point; Constant voltage, constant current, under-voltage protection (MPPT is more suitable for solar charging) The output has error indicating lamp, it will light when the output voltage drifts too serious, short circuit and another fault; Inductor use iron silicon aluminum, 0.8 double winding, generate less heat.
Far-right one (close to output) is for Under voltage protection (VV) and it is mostly used for Solar Charging
The device can monitor a DC-DC output voltage and quickly disconnect the power source from the DC-DC input load when an overvoltage condition occurs. A power-OK output signals when the DC-DC input voltage falls below an adjustable threshold.
Center one is for Constant Current ( CC)
A constant current is that does not change its intensity with time.
The left one (near input terminal) is for Constant Voltage ( CV )
Keep the output voltage constant

More Information

More Information
Subtitle	N/A
UPC/EAN	4604046163628
M.R.P	₹2,460.00
Count	1
Brand Name	CentIoT
Model	DC011-LTC3780
Whoesale	Available
Supply Voltage	DC 5V-32V
Output Voltage	DC 1V-30V
Color	N/A
Dimension	7.8 x 4.6 x 1.5 cm