Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Battery Charge Controller Module - 6-60V Suitable For Lithium Li-ion Battery Charging for Solar Energy Wind Turbines
- Buy 100 for ₹982.00 each and save 13%
- Buy 1000 for ₹877.00 each and save 22%
This product is suitable for 6-60V battery charging control, can be set free start charging voltage and stop charging voltage! In the IN input charger 6-60V voltage, the OUT termination Connect the battery, for example, set 12V start, 15V stop, when the voltage is below 12V, the relay closes will take the charger charging voltage to the battery, when the charge voltage is greater than 15V, The relay disconnect to stop charging, suitable for use in household chargers, solar energy, wind turbines.
In the set voltage value, start button play button raised, about stop button role to down key
Set the start voltage: Normal display voltage state, press to a starting voltage button, to display the start charging voltage. Press and hold the start button for 3 Seconds, digital flashes, by start and stop button, set the start charging voltage value.
Set Stop voltage: Normal Voltage normal display mode, press to a Stop voltage button, to display the Stop charging voltage. Press and hold the Stop button for 3 Seconds, digital flashes, by start and stop button, set the Stop charging voltage value.
Factory Reset: Energized state while holding down the start/stop button, digital display 888, which is the factory setting.
Input voltage: DC 6 - 60V (Max 80v)
Display Accuracy: 0.1V
Control accuracy: 0.1V
Output Type: Direct Output
Battery Type/Range: 6 - 60V all kinds of batteries