Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
NRF24L01 PA LNA 2.4G -1100m Long Range Wireless Transceiver Module
- Buy 100 for ₹175.00 each and save 13%
- Buy 1000 for ₹157.00 each and save 22%
If you want to set up your wireless communication system, this wireless Transceiver module is the most suitable module to choose from! It can achieve a good balance between wireless transition performance, You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
What's more, this NRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1100+ meters! (No barrier)
A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
The on-chip voltage regulator accepts supply voltages from 1.9 to 3.6V. The module has 5V tolerant inputs which allow for direct connection of SPI pins for Arduino.
Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: for Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
- NRF24L01+PA+LNA digital chip transmission, with professional design full-featured dual RF amplifier, high-power PA (Power Amp) and LNA (Low Noise Amp) chip, RF switch, bandpass filter, etc., to effectively extend the communication distance.
- Using instruction: VCC on the module is connected with a power source, GND connected to ground, CE, CSN, SCK, MISO, MOSI, and IRQ six input terminals connect with I/O ports sequentially
- Operating voltage: 3 ~ 3.6V Max; Use NRF24L01 Adapter if your power source is 5V
- Range: 1100+ meters line of sight; Frequency: 2.4GHz~2.5GHz ISM band; Max Current: 115mA; Multi-frequency: 125 frequency
- Applied with two-layer PCB board production process, premium, and high quality
1 * LKY67 22dBm SMA Antenna.
|Supply Voltage||1.9 V - 3.6 V|
|Dimension||5 x 1.5 x 1.5 cm|