Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
Lifepo4 6S/7S/13S 24V 36V 48V - 25A BMS Battery Management System PCM PCB - for 6, 7 and 13 Series Lifepo4 Lithium Ion Phosphate Battery Pack for ebike erikshaw
- Buy 100 for ₹662.00 each and save 13%
- Buy 1000 for ₹591.00 each and save 22%
A battery management system (BMS) is an electronic system that manages a rechargeable battery (cell or battery pack), such as by monitoring its state, calculating secondary data, reporting that data, protecting the battery, controlling its environment, and balancing it.
This protection board adopts a mature protection circuit, original special IC, 80A high current ultra-low internal resistance MOS (single MOS internal resistance as low as 6.5mΩ), and has various stable protection and discharge protection functions.
Strong compatibility: The protection board supports both the same port and split port. Supports 6-13 string lithium iron phosphate batteries. (Note: The lithium iron phosphate board cannot be used for lithium iron or polymer batteries)
Default delivery: 13S (requires other strings only need to change the wiring method) Small volume and a large current can be used in high current applications such as power tools, electric vehicles, and UPS.
NOTE: This module is only suitable for 3.2V lifepo4 or iron phosphate batteries, do not use it with lithium-ion or lithium polymer batteries
Suitable for 6, 7 and 13 string lithium iron phosphate lifepo4 battery series combination; Module Output Voltage: 24V @6S; 36V @ 7S 48V @ 13S; Over Discharge Protection Current: 40A; Charging Current: 18A; Charging voltage: 24V @ 6S/7S; 36V to 48V @ 13S
Over-Charging Voltage: 4.25V; OverCharge Recovery Voltage: 4.19V; Overcharge Voltage Protection Delay: 1000ms
Over Discharge Voltage: 2.8V; Over-discharge recovery voltage: 3V; Over-discharge voltage protection delay: 140ms
Over-dishcarge protection current: 60A; Split Discharge Current (continuous): 26A; Same Port Discharge Current (Continuous): 18A; Overcurrent protection recovery: Disconnect load release
With Short circuit protection Overcharge protection Over-discharge protection Overcurrent protection, Remove protection condition automatic recovery, without activation
|Dimension||6 x 3 x 1 cm|