HC-06 6 Pin Bluetooth Module

HC-06 6 Pin Bluetooth Module

SPP-C BT V3.0 BT2.1+EDR - Wireless Bluetooth Serial Port UART Module - for Arduino Android iOS - with Logic Level Converter

SPP-C BT V3.0 BT2.1+EDR - Wireless Bluetooth Serial Port UART Module - for Arduino Android iOS - with Logic Level Converter

HC-05 V2.0+EDR - Wireless Bluetooth Serial RS232 Port UART Module - for Arduino Android iOS - with Logic Level Converter - Master/Slave

₹381.00
In stock
SKU
BL014-HC05-6PIN-B
  • Buy 100 for ₹333.00 each and save 13%
  • Buy 1000 for ₹297.00 each and save 23%

Product description:

  • Leads to 6 feet: EN / VCC / GND / RXD / TXD / STATE (Bluetooth status leads to the foot, is not connected to the output low, after connecting output high)

  • with the connection status indicator, LED flash means no Bluetooth connection; LED flashing slowly that enter the AT command mode

  • onboard 3.3V regulator chip, the input voltage DC 3.6V-6V; When unpaired, current of about 30mA (because LED lights flashing, the current state of change); After successful pairing, the current is about 10mA 

  • Interface level 3.3V, you can directly connect a variety of microcontrollers (/51/AVR/PIC/ARM/MSP430, etc.), 5V microcontroller can also be directly connected. Directly connected to the microcontroller serial port, not through the MAX232 chip! 

  • open area effective transmission distance of 10 meters, over 10 meters are possible but do not guarantee the quality of the connection 6. After successful pairing can be used as a full-duplex serial port. Do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format. This is the most common communication format that does not support other formats! 

  • Press the key to give the Bluetooth module is energized to enter AT mode, set parameters and query information 8 Switch between master and slave mode via AT commands 

  • Default baud rate is 9600, Default passkey is 1234, Default name HC-05

  • The module is protected with transparent shrink tube WIRING PINOUT: VCC: positive power supply GND: power supply is negative RXD: Receive side, the Bluetooth module receives data sent to the other device; TXD terminal normally connected to the other device to send TXD: sending end, the Bluetooth module to send data to other devices; RXD terminal normally connected to other devices receiving EN: Enable, then you need to enter AT mode 3.3V

Specification:

  • Supports Master and Slave Configuration; Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards.

  • Input voltage: 3.6V--6V, 7V ban over; Module working voltage 3.3 V.

  • Power anti-reverse, reverse module does not work; Working current: matching for 30 mA, matching the communication for 8 mA.

  • Default baud rate is 9600, Default passkey is 1234, Default name HC-05

  • Weight:. 3.5g, PCB Dimensions: 37.3mm (length) * 15.5mm (W)

More Information
Subtitle N/A
UPC/EAN 4604046158433
M.R.P N/A
Brand Name CentIoT
Model BL014-HC05-6PIN-B
Whoesale Available
Supply Voltage 3.6V--6V
Output Voltage N/A
Color N/A
Dimension N/A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts