CP2102 USB 2.0 to TTL UART Module 5Pin RED

CP2102 based USB to UART TTL Converter Module - 5 Pin Out -

This is a USB2.0 to TTL UART Converter module which is based on CP2102 Bridge by SiLabs. This module can be used with Laptop's which don't have a standard serial port. This module creates a virtual COM port using USB on your computer which can support various standard Baud Rates for serial communication.

This module has 5 pin breakout connector which includes

• TXD
• RXD
• GND
• 3V3
• 5V

This module can be used to upload Arduino sketches onto your Arduino loaded AVR devices over RXD, TXD pins of the module. 5 Pin Female to Female connector comes with this module.

You may need to install drivers for CP2102 before you use this module.

Built-in self-recovery fuse. In the event of an accidental short circuit, it can effectively protect your computer USB port and Downloader.

Built-in three LEDs: power indicator, data reception indicator, the data transmission indicator, working status

Specification:

• CP2102 chip from SiLabs is a single-chip USB to UART bridge IC

• It can be used to migrate legacy serial port based devices to USB

• Stable and reliable chipset CP2102 USB specification 2.0 compliant with full-speed 12 Mbps

• Standard USB type A male and TTL 5 pin; Support dual voltage 3.3V and 5V

• Supports windows vista or XP or server 2003/200, Mac OS-X/OS-9, Linux