RF Transceiver Module RFM95W 868MHZ

RF Transceiver Module RFM95W 868MHZ

RF Transceiver Module RFM98W 433MHZ

RF Transceiver Module RFM98W 433MHZ

RF Transceiver Module RFM95W 915MHZ

The  RFM95W transceivers feature the LoRaTM long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. Using Hope RF’s patented LoRaTM modulation technique RFM95W can achieve a sensitivity of over -148dBm using a low-cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields industry leading link budget making it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity, and energy consumption. These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The RFM95W deliver exceptional phase noise, selectivity, receiver linearity and IIP3 for significantly lower current consumption than competing devices.

₹824.00
In stock
SKU
RF014-RFM95W-915S2

Feature and application:

Features:

  • LoRaTM Modem.

  • 168 dB maximum link budget.

  • +20 dBm - 100 mW constant RF output vs. V supply.

  • +14 dBm high-efficiency PA.

  • Programmable bit rate up to 300 kbps.

  • High sensitivity: down to -148 dBm.

  • Bullet-proof front end: IIP3 = -12.5 dBm.

  • Excellent blocking immunity.

  • Low RX current of 10.3 mA, 200 nA register retention.

  • Fully integrated synthesizer with a resolution of 61 Hz.

  • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

  • Built-in bit synchronizer for clock recovery.

  • Preamble detection.

  • 127 dB Dynamic Range RSSI.

  • Automatic RF Sense and CAD with ultra-fast AFC.

  • Packet engine up to 256 bytes with CRC.

  • Built-in temperature sensor and low battery indicator.

  • Module Size:16*16mm

Applications:

  • Automated Meter Reading.

  • Home and Building Automation.

  • Wireless Alarm and Security Systems.

  • Industrial Monitoring and Control

  • Long-range Irrigation Systems

Block Diagram:

Pin diagram:

Pin Description:

Number

Name

Type

Description Description Stand-Alone Mode

1

GND

-

Ground

2

MISO

O

SPI Data output

3

MOSI

I

SPI Data input

4

SCK

I

SPI Clock input

5

NSS

I

SPI Chip select input

6

RESET

I

Reset trigger input

7

DIO5

I/O

Digital I/O, software configured

8

GND

-

Ground

9

ANT

-

RF signal output/input.

10

GND

-

Ground

11

DIO3

I/O

Digital I/O, software configured

12

DIO4

I/O

Digital I/O, software configured

13

3.3V

-

Supply voltage

14

DIO0

I/O

Digital I/O, software configured

15

DIO1

I/O

Digital I/O, software configured

16

DIO2

I/O

Digital I/O, software configured

Electrical characteristics:

Absolute Maximum Ratings:

         Stresses above the values listed below may cause permanent device failure. Exposure to absolute maximum ratings for extended periods may affect device reliability.

Symbol

Description

Min

Max

Unit

VDDmr

Supply Voltage

-0.5

3.9

V

Tmr

Temperature

-55

+115

° C

Tj

Junction temperature

-

+125

° C

Pmr

RF Input Level

-

+6

dBm

Operating range:

Symbol

Description

Min

Max

Unit

VDDop

Supply voltage(1.8V-2.4V 17dBm, 2.4V- 3.6V 20dBm)

1.8

 3.7

V

Top

Operational temperature range

-20

+70

°C

Clop

Load capacitance on digital ports

-

25

pF

ML

RF Input Level

-

+10

dBm

Chip specification:

          The tables below give the electrical specifications of the transceiver under the following conditions: Supply voltage VDD=3.3 V, temperature = 25 °C, FXOSC= 32 MHz, FRF= 169/434/868/915 MHz (see specific indication), Pout =+13dBm, 2-level FSK modulation without pre-filtering, FDA = 5 kHz, Bit Rate = 4.8 kb/s and terminated in a matched 50 Ohm impedance, shared Rx and Tx path matching. unless otherwise specified.

Power consumption:

Symbol

Description

Conditions

Min

Typ

Max

Unit

IDDSL

Supply current in Sleep mode

-

0.2

1

uA

IDDIDLE

Supply current in Idle mode

RC oscillator enabled

-

1.5

-

uA

IDDST

Supply current in Standby mode

Crystal oscillator enabled

-

1.6

1.8

mA

IDDFS

Supply current in Synthesizer mode

FSRx

-

5.8

-

mA

IDDR

Supply current in Receive mode

LnaBoostOff, higher bandsLnaBoostOn, higher bands Lower bands

-

-

-

10.8

11.5

12.1

-

-

-

mA

IDDT

Supply current in Transmit mode with impedance matching

RFOP = +20 dBm, on PA_BOOST RFOP = +17 dBm, on PA_BOOST

RFOP = +13 dBm, on RFO_LF/HF pin RFOP = + 7 dBm, on RFO_LF/HF pin

-

-

-

-

120

87

29

20

-

-

-

-

mA

mA

mA

mA

Frequency synthesis:

Symbol

Description

Conditions

Min

Typ

Max

Unit

FR

Synthesizer frequency range

Programmable

137

410

862

-

-

-

175

525

1020

MHz

FXOSC

Crystal oscillator frequency

-

32

-

MHz

TS_OSC

Crystal oscillator wake-up time

-

250

-

us

TS_FS

Frequency synthesizer wake-up time to PllLock signal

From Standby mode

-

60

-

us

TS_HOP

Frequency synthesizer hop time at most 10 kHz away from the target the frequency

200 kHz step

1 MHzstep

5 MHzstep

7 MHzstep

12 MHzstep

20 MHzstep

25 MHzstep

-

-

-

-

-

-

-

20

20

50

50

50

50

50

-

-

-

-

-

-

-

us

us

us

us

us

us

us

FSTEP

Frequency synthesizer step

FSTEP = FXOSC/219

-

61.0

-

Hz

FRC

RC Oscillator frequency

After calibration

-

62.5

-

kHz

BRF

Bit rate, FSK

Programmable values (1)

1.2

-

300

kbps

BRO

Bit rate, OOK

Programmable

1.2

-

32.768

kbps

BRA

Bit Rate Accuracy

ABS(wanted BR - available BR)

-

-

250

ppm

FDA

Frequency deviation, FSK (1)

Programmable

FDA + BRF/2 =< 250 kHz

0.6

-

200

kHz

FSK/OOK Mode Receiver:

       All receiver tests are performed with RxBw = 10 kHz (Single Side Bandwidth) as programmed inRegRxBw, receiving a PN15 sequence. Sensitivities are reported for a 0.1% BER (with Bit Synchronizer enabled) unless otherwise specified. Blocking tests are performed with an unmodulated interferer. The wanted signal power for the Blocking Immunity, ACR, IIP2, IIP3 and AMR tests is set 3 dB above the receiver sensitivity level.

Symbol

Description

Conditions

Min

Typ

Max

Unit

RFS_F_LF

The direct tie of RFI and RFO pins, shared Rx, Tx paths FSK sensitivity, highest LNA gain.

Lower frequency bands

FDA = 5 kHz, BR = 1.2 kb/s FDA = 5 kHz, BR = 4.8 kb/s FDA = 40 kHz, BR = 38.4 kb/s* FDA = 20 kHz, BR = 38.4 kb/s** FDA = 62.5 kHz, BR = 250kb/s***

-

-

-

-

-

-121

-117

-107

-108

-95

-

-

-

-

-

dBm

dBm

dBm

dBm

dBm

Split RF paths, the RF switch insertion loss is not accounted for. Lower frequency bands

FDA = 5 kHz, BR = 1.2 kb/s FDA = 5 kHz, BR = 4.8 kb/s FDA = 40 kHz, BR = 38.4 kb/s* FDA = 20 kHz, BR = 38.4 kb/s** FDA = 62.5 kHz, BR = 250kb/s***

-

-

-

-

-

-123

-119

-109

-110

-97

-

-

-

-

-

dBm

dBm

dBm

dBm

dBm

RFS_F_HF

The direct tie of RFI and RFO pins, shared Rx, Tx paths FSK sensitivity, highest LNA gain.

Higher frequency bands

FDA = 5 kHz, BR = 1.2 kb/s FDA = 5 kHz, BR = 4.8 kb/s FDA = 40 kHz, BR = 38.4 kb/s* FDA = 20 kHz, BR = 38.4 kb/s** FDA = 62.5 kHz, BR = 250kb/s***

-

-

-

-

-

-119

-115

-105

-105

-92

-

-

-

-

-

dBm

dBm

dBm

dBm

dBm

Split RF paths, LnaBoost is turned on, the RF switch insertion loss is not accounted for higher frequency bands

FDA = 5 kHz, BR = 1.2 kb/s FDA = 5 kHz, BR = 4.8 kb/s FDA = 40 kHz, BR = 38.4 kb/s* FDA = 20 kHz, BR = 38.4 kb/s** FDA = 62.5 kHz, BR = 250kb/s***

-

-

-

-

-

-123

-119

-109

-109

-96

-

-

-

-

-

dBm

dBm

dBm

dBm

dBm


RFS_O

OOK sensitivity, highest LNA gain shared Rx, Tx paths

BR = 4.8 kb/s BR = 32 kb/s

-

-

-117

-108

-

-

dBm

dBm

CCR

Co-Channel Rejection

-

-9

-

dB

ACR

Adjacent Channel Rejection

FDA = 5 kHz, BR=4.8kb/s

Offset = +/- 25 kHz or +/- 50kHz

169MHzBand 434 MHzBand

8-900 MHzBand

-

-

-

59

56

50

-

-

-

dB

dB

dB

BI_HF

Blocking Immunity, higher bands

Offset = +/- 1 MHz

Offset = +/- 2 MHz

Offset = +/- 10 MHz

-

-

-

71

76

84

-

-

-

dB

dB

dB

More Information
Subtitle N/A
UPC/EAN 4604046159942
Count N/A
M.R.P ₹1,048.00
Brand Name HopeRF
Model RFM95W-915
Whoesale Available
Frequency 915MHZ
Color Green
Modulations FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
FSK Bit rates N/A
Demodulations N/A
Dimension 16X16mm
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts