Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
ADMP401 MEMS Amplifier AUD Microphone Breakout Module Board 40mW With Pins 1.5V to 3.3V DC
This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input this means the microphone's input can fit flush against the enclosure of your project plus you will not have to deal with trying to solder the microphone's wacky footprint
The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifier's AUD output will float at one half Vcc when no sound is being picked up, the amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arm's length and is being talked into at normal conversational volume levels
ADMP401 MEMS microphone.
3dB roll-off at 100Hz and 15kHz; SNR: -62dBA
DC voltage between **1.5 and 3.3V **with a supply current of about 250 μA.
Size: 1.3cm*1cm (0.51"*0.39")
|Dimension||1.3 cm x 1 cm|