3S 100A 12V BMS Battery Charging Module PCB BMS Protection Board For 3 Series lithium LicoO2 Limn2O4 18650 battery - with Balance - suitable for UPS Inverter telecom Battery Box

A battery management system (BMS) is an electronic system that manages a rechargeable battery (cell or battery pack), such as by monitoring its state, calculating secondary data, reporting that data, protecting the battery, controlling its environment, and balancing it.

Note :

This board is suitable for UPS, Battery bank or inverter, also suitable for high power electronic tools, like screwdriver and drill.

Features:

• High-accuracy voltage detection circuit;

• The terminal of the charger using a high voltage device;

• Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);

• MOS transistor can control the battery charge and discharge;

• low standby current consumption

Specification:

• Suitable for 3 string 18650 batteries or polymer lithium battery series combination) 10.8V (rated voltage for polymer battery) 11.1V (18650 or 3.7V lithium battery rated voltage) 12.6V (lithium battery is fully charged after the voltage)

• Charging voltage range:: 12.6V; Maximal continuous charging current: 8A

• Maximum Continuous Discharging Current: 100A, Maximum Working current: 100A, Max Instantaneous Discharge Current: 150A; Static current: less than 8uA;

• Short circuit protection: protect and automatic recovery, Over-discharge protection: yes, over-current-protection: yes

• Refer Datasheet in Images for more information