14S 48V Li-ion battery PCM BMS 100A Common port With Balance For e-bike Solar Energy System

14S 48V Li-ion battery PCM BMS 100A Common port With Balance For e-bike Solar Energy System

14S 48V Li-ion BMS 200A Common port With Balance For Solar Energy System lithium battery

₹13,674.00
In stock
SKU
BM979-14S-48V-3.7V-CP-200A

Overview:

  •  14S 48V 200A PCB is used for 14 series 48V Li-ion battery pack.

  • We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer, etc.

  • The main functions are: overcharge protection, over-discharge protection, over current protection, short-circuit protection, temperature protection, etc.

  • According to the customer request, we can develop PCM in different sizes and structures.

  • BMS manufactured by high-quality Mos and IC imported. Keep your battery long cycle service lifetime.

 Advantage:

  • Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

  • Strong load ability, constant discharge current 400A use of high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help to cool.

  • IC itself has a power balancing function. The circuit is simple and reliable.

  • Typical voltage detection for each cell. So each battery will be prevented over charged or over-discharged. Over current and short circuit protection function is very reliable. A long-time short circuit of the load won’t affect the PCB and the battery. Temperature protection during charging and discharging.

  • Extreme low power consumption. The consumption of the whole device is less than 50uA.

  • PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.

Specification:

  • Accessory Type: Battery Accessories

  • Applications: 3.7V Lion battery rated

  • Battery series: 14S

  • Overcharge protection: Yes

  • Over-discharge voltage: Yes

  • Short circuit protection: Yes

  • Balance function: Yes

 

Description

Specification

Unite

Remark

80A

100A

200A

Discharge

Continue discharge current

80

100

200

A

 

Discharge Peak current

200

200

400

A

 

Over current protection

200

200

400

A

 

Charge

Charge Voltage

58.8(4.2V*14)

V

 

Charge current

80

100

200

A

Charge in separate port set as required

Over charge protection

Over charge detect voltage

4.25±0.025

V

 

Over charge protection delay

0.5

S

 

Over charge release voltage

4.19±0.05

V

 

Balance

Balance detect voltage

4.18

V

 

Balance release voltage

4.18

V

 

Balance current

35±5 mA

mA

Balance current 35±5mA

Over discharge protection

Over discharge detect voltage

2.8±0.05

V

 

Over discharge detect delay

0.5

S

 

Over discharge release voltage

3.0±0.05

V

 

Over current protection

Over current detect voltage

150

mV

 

Over current detect delay

9

MS

 

Over-current protection release condition

Offload

 

 

Short circuit protection

Short circuit protection condition

Short circuit of external load

 

 

Short circuit detect delay

250

uS

 

Short circuit protection release condition

Offload

 

 

Temp Protection

Temp Protection

65°C/75°C

°C

Set as required

Inner resistance

Conductive resistance in main circuit

10

 

Electricity self consume

Working current

40

uA

 

Sleeping current(battery in discharge)

20

uA

 

Work Temp

Temp range

-30 - 80

°C

 

Product structure:

Wiring diagram:

Application diagram:

FAQ:

1. What is the common port and separate port? what is the difference?

  • We take 13S 48V 16A BMS as an example, common port 16A means your charge cathode and discharge cathode are connected in the same point end (P-) common connection port, so the charge current and discharge current are the same 16A.
  • The separate port is separately connected by charge cathode (C-) and discharge cathode (P-), so the charge current and discharge current are different, discharge current 16A, charge current 8A.

2. What is the balance function?

  • The working principle and function are as followings, when your one cell voltage is up to alarm voltage(Li-ion up to 4.18V, Life Po4 up to (3.6V), then the cell Balance starts to work, balance resistance starts discharge with 35ma(when balance discharge starts to work, BMS will start a little heat up, which is the normal reflection), the cell is in both charging and discharging status, and others which are not reached to alarm voltage(Li-ion 4.18V, Life Po43.6V)are only in charging status, no discharging.
  • when the fast cell voltage is reached to alarm voltage (Li-ion 4.25V, Life Po43.75V)BMS starts off power protection, all the other cells are all in stop of charging, this process will enable your battery charging in balance current, and your battery voltage is in balance status, but when your cell voltage difference is in a big range, then balance can not be functioning well

3.The relationship between Battery capacity and BMS current?

  • There is no direct relationship between Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say, if your engine is powerful, you should choose high current of BMS, it does not rely on battery capacity.

4. What type of charger should I choose?

  • Lithium battery must choose a specific charger, do not use Charger for Lead-acid battery, for leadacid charger may have MOS with high-pressure breakdown protection, which will not protect of BMS overcharge.
  • Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X 4.2V.

5. Whether my BMS damaged?

  • If you want to judge if the BMS is damaged, please take the following steps to test if each cell voltage is the same with a voltmeter

  •  if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displayed as no charge, no discharge, no discharge while the battery has voltage.

More Information
Subtitle N/A
UPC/EAN 679043306075
Count N/A
M.R.P ₹27,348.00
Brand Name CENTIoT
Model BM979-14S-48V-3.7V-CP-200A
Whoesale Available
Charging Voltage 58V
Continuous current 200A
Standard voltage 3.7V
Operating Temperature Range N/A
Discharging voltage 48V-58V
Discharge peak current 400A
Dimension N/A
Sleep current ?20uA
Charging current 200A
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts